EV Pickup Conversion Project - $2,500 (Cottonwood)

Chevy S-10 Extended Cab Electric Conversion Project Located in Cottonwood, California about 150m North of Sacramento.
I call it Sparky.
The S-10 is a great candidate for an electric pickup conversion with its light weight and aerodynamic body with lots of room under the bed for batteries.
This project includes: *The S-10 Body (straight, no damage) with 5 speed manual transmission, engine completely removed, all gas lines and tank removed.
A/C system remains intact.
*11" Kostov 144v DC Motor, Shaft Coupler and Bell-Housing Adapter for the S-10 Transmission.
The motor spins with 12v.
An Extra identical motor (missing 1 bearing) is included, and also an extra Armature with both bearings.
Motor Mounts are also included (which must be adapted to the frame).
1/4" Steel plate bent to the angle of the frame for the motor mounts also included.
As you can see in the pics I have installed hinges on the Bed so it can be tilted up giving access to the frame, where there is lots of room for battery boxes to be built.
The hinges are made from ~1 1/2" x 3/16" angle steel so they are not intended for a "dump bed" - only to hold the bed up for building battery boxes.
Maybe you want to upgrade them for a dumpbed.
The interior is very decent (driver seat torn a bit), Jump seats in the back.
Bed and tailgate in very good condition.
Needs a passenger mirror.
Needs tires, but it will roll.
Bring trailer.
Clean Title, Non-Op Status.